Glycol-modified Polyethylene terephthalate
PETG is a low temperature thermoplastic film with good thermoformability, and is a cost effective choice for applications that don’t require high-performance films.
- Spectar® PETG
- High rigidity
- Thermoformed components
|Property||Test Method||Typical Value|
|English units||SI Units|
|Available Thickness Range||-||5 – 60 mil||127 - 1524µm|
|Max. Operating Temp.||-||150ºF||65°C|
|Melt Point||ASTM D-3418||190ºF||87°C|
|Specific Gravity||ASTM D-792||1.27||1.27|
|Tensile Strength||ASTM D-638||7,700 psi||53 MPa|
Spectra® is the registered trademark of Honeywell.
Note: The information displayed on the Welch Fluorocarbon, Inc. website should be utilized for evaluation and reference purposes only, and should not be used as a definitive source. It is the user’s responsibility to test the suitability of any material for their particular end use.